Loading...

Stocking Status: Special Order - Typically ships in 5-10 business days

Will drop ship from manufacturer in 1 business day with Next Day Air or 2nd Day Air Shipping Selection

Will drop ship from manufacturer in 1-2 business days if order total is over $500.00

$508.53
  • Buy 10 for $487.07 each and save 4%
  • Buy 25 for $485.11 each and save 5%
  • Buy 50 for $483.16 each and save 5%
SKU 9006-2460
Weight 26.820000
Length (inch) 464
Length Type Outside Circumference
Top Belt Width per strand (inch) 1.5
Nominal Thickness (inch) 0.91
Understanding the Part Number

E – The E stands for a “E” section v-belt. This is considered a “Classic” v-belt style that has a top width of 1 1/2 (1.50) inches and a thickness of 29/32 (0.906) inches.

460– 460 inches is the inside circumference of the belt.  For E-section v-belts, the outside circumference is found by adding 4 inches to the inside length of the belt.  So, the outside circumference of the E460 belt is 464 inches (460+4).

Specifications
Dimensions:
Length (inch) 464
Length (mm) 11786
Length Type Outside Circumference
Top Belt Width per strand (inch) 1.5
Top Belt Width per strand (mm) 38
Nominal Thickness (inch) 0.91
Nominal Thickness (mm) 23
Design:
  • Flex-Weave Cover – The Gates E460 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II E460 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II E460 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every E460 belt can be used in a matched set, regardless of batch or lot.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: E441 (445 inch length)

Next Size Longer: E480 (484 inch length)

 

Next Size Narrower: none (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: none (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 4” Pulley Horsepower Rating (2) on a 2.4” Pulley Shock Load Backside Idler Clutching
Gates E460 $508.53
Gates
Gates
Gates
Gates
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley
Compatible Pulleys / Sheaves:

Gates does not stock any pulleys or sheaves for E-section belts. If you need an E-section pulley, please contact us with your requirements and we will get a quote from Gates Made-to-Order Metals team.

Competitive Cross-Reference:
  • Balflex Classic E460
  • Bando Power King E460
  • Carlisle Super II E460
  • Dayco Gold Label AP55
  • Dodge AP55
  • Dunlop E460
  • Fenner Classic E460
  • Goodrich E460 vbelt
  • Goodyear Hy-T Plus E460
  • Jason Industrial Unimatch Multi-Plus E460
  • Mitsuboshi Red Label E460
  • Optibelt VB E460
  • Pirelli E460 veebelt
  • Pix E460 vbelt
  • TB Woods Conventional E460
  • Thermoid Prime Mover E460
  • Thermoid Select E460