Stocking Status: Typically in Stock - Ships in 1 business day.
$55.08
- Buy 10 for $52.33 each and save 5%
- Buy 25 for $50.95 each and save 7%
- Buy 50 for $49.57 each and save 10%
Gates C105 Belt is available to buy in increments of 1
| SKU | 9004-2105 |
|---|---|
| Weight | 2.050000 |
| Length (inch) | 109 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.88 |
| Nominal Thickness (inch) | 0.53 |
Understanding the Part Number
C – The C stands for a “C” section v-belt. This is considered a “Classic” v-belt style that has a top width of 7/8 (0.875) inches and a thickness of 17/32 (0.531) inches.
105– 105 inches is the inside circumference of the belt. For C-section v-belts, the outside circumference is found by adding 4 inches to the inside length of the belt. So, the outside circumference of the C105 belt is 109 inches (105+4).
Specifications
Dimensions:
| Length (inch) | 109 |
|---|---|
| Length (mm) | 2769 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.88 |
|---|---|
| Top Belt Width per strand (mm) | 22 |
| Nominal Thickness (inch) | 0.53 |
| Nominal Thickness (mm) | 13 |
Design:
- Flex-Weave Cover – The Gates C105 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II C105 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II C105 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every C105 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates C-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Products
Similar Sizes:
Next Size Shorter: C104 (108 inch length)
Next Size Longer: C106 (110 inch length)
Next Size Narrower: B106 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: D104 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
| Part Number | Price | Horsepower Rating (1) on a 9” Pulley | Horsepower Rating (1) on a 7” Pulley | Shock Load | Backside Idler | Clutching |
|---|---|---|---|---|---|---|
| Gates C105 | $55.08 | 19.3 | Not Suitable | Good | Not Ideal | Good |
| Gates | ||||||
| Gates | ||||||
| Gates CX105 | $72.42 | 23.7 | 18.4 | Good | Not Ideal | Not Suitable |
| Gates CP105 | $100.51 | 42.4 | Not Suitable | Excellent | Not Ideal | Good |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 9” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 7” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Heavy Duty Applications
Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
Competitive Cross-Reference:
- AC Delco C105 fan belt
- Balflex Classic C105
- Bando Power King C105
- Bestorq Wrapped C105
- Browning Super Gripbelt C105
- Carlisle Super II C105
- Continental C105 V-Belt
- ContiTech (Conti) C105
- Dayco Gold Label AP55
- Dayton C105 fan belt
- Dodge 107080 AP55
- Dunlop C105
- Fenner Classic C105
- Goodrich C105 vbelt
- Goodyear Hy-T Plus C105
- Grainger 4FH84
- Hutchinson Conventional Wrapped C105
- Jason Industrial Unimatch Multi-Plus C105
- Maska Classical VBC105
- Mitsuboshi Red Label C105
- Optibelt VB C105
- Pirelli C105 veebelt
- Pix C105 vbelt
- TB Woods Conventional C105
- Thermoid Prime Mover C105
- Thermoid Select C105
