Stocking Status: Typically in Stock - Ships in 1 business day
- Buy 10 for $21.57 each and save 5%
- Buy 25 for $21.01 each and save 7%
- Buy 50 for $20.44 each and save 10%
SKU | 9003-2091 |
---|---|
Weight | 1.050000 |
Length (inch) | 94 |
Length Type | Outside Circumference |
Top Belt Width per strand (inch) | 0.66 |
Nominal Thickness (inch) | 0.41 |
B – The B stands for a “B” section v-belt. This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.
91– 91 inches is the inside circumference of the belt. For B-section v-belts, the outside circumference is found by adding 3 inches to the inside length of the belt. So, the outside circumference of the B91 belt is 94 inches (91+3).
Dimensions:
Length (inch) | 94 |
---|---|
Length (mm) | 2388 |
Length Type | Outside Circumference |
Top Belt Width per strand (inch) | 0.66 |
---|---|
Top Belt Width per strand (mm) | 17 |
Nominal Thickness (inch) | 0.41 |
Nominal Thickness (mm) | 10 |
Design:
- Flex-Weave Cover – The Gates B91 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II B91 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every B91 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Sizes:
Next Size Shorter: B90 (93 inch length)
Next Size Longer: B92 (95 inch length)
Next Size Narrower: A92 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: C90 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
Part Number | Price | Horsepower Rating (1) on a 6” Pulley | Horsepower Rating (1) on a 4” Pulley | Shock Load | Backside Idler | Clutching |
---|---|---|---|---|---|---|
Gates B91 | $22.71 | 8.85 | Not Suitable | Good | Not Ideal | Good |
Gates 5L940 | $21.32 | 5.21 | 2.3 | Good | Good | |
Gates 6994 | $39.33 | 6.49 | 2.86 | Excellent | Good | Good |
Gates BX91 | $29.76 | 10 | 6.04 | Good | Not Ideal | Not Suitable |
Gates |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)
Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)
Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)
Recommended Pulleys or Sheaves for Heavy Duty ApplicationsMulti-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
- AC Delco B91 fan belt
- Balflex Classic B91
- Bando Power King B91
- Bestorq Wrapped B91
- Browning Super Gripbelt B91
- Carlisle Super II B91
- Continental B91 V-Belt
- ContiTech (Conti) B91
- Dayco Gold Label AP55
- Dayton B91 fan belt
- Dodge 107939 AP55
- Dunlop B91
- Fenner Classic B91
- Goodrich B91 vbelt
- Goodyear Hy-T Plus B91
- Grainger 6L213
- Hutchinson Conventional Wrapped B91
- Jason Industrial Unimatch Multi-Plus B91
- Maska Classical VBB91
- Mitsuboshi Red Label B91
- Optibelt VB B91
- Pirelli B91 veebelt
- Pix B91 vbelt
- TB Woods Conventional B91
- Thermoid Prime Mover B91
- Thermoid Select B91