Stocking Status: Typically in Stock - Ships in 1 business day.
$21.56
- Buy 10 for $20.48 each and save 5%
- Buy 25 for $19.94 each and save 8%
- Buy 50 for $19.40 each and save 10%
Gates B86 Belt is available to buy in increments of 1
| SKU | 9003-2086 |
|---|---|
| Weight | 0.950000 |
| Length (inch) | 89 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.66 |
| Nominal Thickness (inch) | 0.41 |
Understanding the Part Number
B – The B stands for a “B” section v-belt. This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.
86– 86 inches is the inside circumference of the belt. For B-section v-belts, the outside circumference is found by adding 3 inches to the inside length of the belt. So, the outside circumference of the B86 belt is 89 inches (86+3).
Specifications
Dimensions:
| Length (inch) | 89 |
|---|---|
| Length (mm) | 2261 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.66 |
|---|---|
| Top Belt Width per strand (mm) | 17 |
| Nominal Thickness (inch) | 0.41 |
| Nominal Thickness (mm) | 10 |
Design:
- Flex-Weave Cover – The Gates B86 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II B86 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II B86 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every B86 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Products
Similar Sizes:
Next Size Shorter: B85 (88 inch length)
Next Size Longer: B87 (90 inch length)
Next Size Narrower: A87 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: C85 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
| Part Number | Price | Horsepower Rating (1) on a 6” Pulley | Horsepower Rating (1) on a 4” Pulley | Shock Load | Backside Idler | Clutching |
|---|---|---|---|---|---|---|
| Gates B86 | $21.56 | 8.85 | Not Suitable | Good | Not Ideal | Good |
| Gates 5L890 | $25.29 | 5.21 | 2.3 | Good | Good | |
| Gates 6989 | $47.06 | 6.49 | 2.86 | Excellent | Good | Good |
| Gates BX86 | $28.55 | 10 | 6.04 | Good | Not Ideal | Not Suitable |
| Gates |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications
Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)
Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)
Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)
Recommended Pulleys or Sheaves for Heavy Duty ApplicationsMulti-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
Competitive Cross-Reference:
- AC Delco B86 fan belt
- Balflex Classic B86
- Bando Power King B86
- Bestorq Wrapped B86
- Browning Super Gripbelt B86
- Carlisle Super II B86
- Continental B86 V-Belt
- ContiTech (Conti) B86
- Dayco Gold Label AP55
- Dayton B86 fan belt
- Dodge 107434 AP55
- Dunlop B86
- Fenner Classic B86
- Goodrich B86 vbelt
- Goodyear Hy-T Plus B86
- Grainger 6A163
- Hutchinson Conventional Wrapped B86
- Jason Industrial Unimatch Multi-Plus B86
- Maska Classical VBB86
- Mitsuboshi Red Label B86
- Optibelt VB B86
- Pirelli B86 veebelt
- Pix B86 vbelt
- TB Woods Conventional B86
- Thermoid Prime Mover B86
- Thermoid Select B86
