Stocking Status: Typically in Stock - Ships in 1 business day.
$20.97
- Buy 10 for $19.92 each and save 5%
- Buy 25 for $19.40 each and save 7%
- Buy 50 for $18.87 each and save 10%
Gates B83 Belt is available to buy in increments of 1
| SKU | 9003-2083 |
|---|---|
| Weight | 0.900000 |
| Length (inch) | 86 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.66 |
| Nominal Thickness (inch) | 0.41 |
Understanding the Part Number
B – The B stands for a “B” section v-belt. This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.
83– 83 inches is the inside circumference of the belt. For B-section v-belts, the outside circumference is found by adding 3 inches to the inside length of the belt. So, the outside circumference of the B83 belt is 86 inches (83+3).
Specifications
Dimensions:
| Length (inch) | 86 |
|---|---|
| Length (mm) | 2184 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.66 |
|---|---|
| Top Belt Width per strand (mm) | 17 |
| Nominal Thickness (inch) | 0.41 |
| Nominal Thickness (mm) | 10 |
Design:
- Flex-Weave Cover – The Gates B83 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II B83 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II B83 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every B83 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Products
Similar Sizes:
Next Size Shorter: B82 (85 inch length)
Next Size Longer: B84 (87 inch length)
Next Size Narrower: A84 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: C82 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
| Part Number | Price | Horsepower Rating (1) on a 6” Pulley | Horsepower Rating (1) on a 4” Pulley | Shock Load | Backside Idler | Clutching |
|---|---|---|---|---|---|---|
| Gates B83 | $20.97 | 8.85 | Not Suitable | Good | Not Ideal | Good |
| Gates 5L860 | $24.65 | 5.21 | 2.3 | Good | Good | |
| Gates 6986 | $45.51 | 6.49 | 2.86 | Excellent | Good | Good |
| Gates BX83 | $27.57 | 10 | 6.04 | Good | Not Ideal | Not Suitable |
| Gates BP83 | $35.49 | 16.3 | Not Suitable | Excellent | Not Ideal | Good |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications
Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)
Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)
Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)
Recommended Pulleys or Sheaves for Heavy Duty ApplicationsMulti-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
Competitive Cross-Reference:
- AC Delco B83 fan belt
- Balflex Classic B83
- Bando Power King B83
- Bestorq Wrapped B83
- Browning Super Gripbelt B83
- Carlisle Super II B83
- Continental B83 V-Belt
- ContiTech (Conti) B83
- Dayco Gold Label AP55
- Dayton B83 fan belt
- Dodge 107049 AP55
- Dunlop B83
- Fenner Classic B83
- Goodrich B83 vbelt
- Goodyear Hy-T Plus B83
- Grainger 3X646
- Hutchinson Conventional Wrapped B83
- Jason Industrial Unimatch Multi-Plus B83
- Maska Classical VBB83
- Mitsuboshi Red Label B83
- Optibelt VB B83
- Pirelli B83 veebelt
- Pix B83 vbelt
- TB Woods Conventional B83
- Thermoid Prime Mover B83
- Thermoid Select B83
