Loading...

Stocking Status: Typically in Stock - Ships in 1 business day

$13.04
  • Buy 10 for $12.39 each and save 5%
  • Buy 25 for $12.06 each and save 8%
  • Buy 50 for $11.74 each and save 10%
SKU 9003-2044
Weight 0.500000
Length (inch) 47
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Nominal Thickness (inch) 0.41
Understanding the Part Number

B – The B stands for a “B” section v-belt.  This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.

44– 44 inches is the inside circumference of the belt.  For B-section v-belts, the outside circumference is found by adding 3 inches to the inside length of the belt.  So, the outside circumference of the B44 belt is 47 inches (44+3).

Specifications
Dimensions:
Length (inch) 47
Length (mm) 1194
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Top Belt Width per strand (mm) 17
Nominal Thickness (inch) 0.41
Nominal Thickness (mm) 10
Design:
  • Flex-Weave Cover – The Gates B44 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II B44 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II B44 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every B44 belt can be used in a matched set, regardless of batch or lot.  An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: B43 (46 inch length)

Next Size Longer: B45 (48 inch length)

 

Next Size Narrower: A45 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: none (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 6” Pulley Horsepower Rating (1) on a 4” Pulley Shock Load Backside Idler Clutching
Gates B44 $13.04 8.85 Not Suitable Good Not Ideal Good
Gates 5L470 $12.20 5.21 2.3 Good Good
Gates 6947 $22.82 6.49 2.86 Excellent Good Good
Gates BX44 $17.27 10 6.04 Good Not Ideal Not Suitable
Gates BP44 $22.01 16.3 Not Suitable Excellent Not Ideal Good
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications

Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)

Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)

Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)

Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

SVS  Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)

Competitive Cross-Reference:
  • AC Delco B44 fan belt
  • Balflex Classic B44
  • Bando Power King B44
  • Bestorq Wrapped B44
  • Browning Super Gripbelt B44
  • Carlisle Super II B44
  • Continental B44 V-Belt
  • ContiTech (Conti) B44
  • Dayco Gold Label AP55
  • Dayton B44 fan belt
  • Dodge 107281 AP55
  • Dunlop B44
  • Fenner Classic B44
  • Goodrich B44 vbelt
  • Goodyear Hy-T Plus B44
  • Grainger 6X571
  • Hutchinson Conventional Wrapped B44
  • Jason Industrial Unimatch Multi-Plus B44
  • Maska Classical VBB44
  • Mitsuboshi Red Label B44
  • Optibelt VB B44
  • Pirelli B44 veebelt
  • Pix B44 vbelt
  • TB Woods Conventional B44
  • Thermoid Prime Mover B44
  • Thermoid Select B44