Stocking Status: Typically in Stock - Ships in 1 business day.
$16.14
- Buy 10 for $15.33 each and save 5%
- Buy 25 for $14.93 each and save 7%
- Buy 50 for $14.53 each and save 10%
Gates A90 Belt is available to buy in increments of 1
| SKU | 9002-2090 |
|---|---|
| Weight | 0.600000 |
| Length (inch) | 92 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.5 |
| Nominal Thickness (inch) | 0.31 |
Understanding the Part Number
A – The A stands for an “A” section v-belt. This is considered a “Classic” v-belt style that has a top width of ½ (0.5) inches and a thickness of 5/16 (0.312) inches.
90– 90 inches is the inside circumference of the belt. For A-section v-belts, the outside circumference is found by adding 2 inches to the inside length of the belt. So, the outside circumference of the A90 belt is 92 inches (90+2).
Specifications
Dimensions:
| Length (inch) | 92 |
|---|---|
| Length (mm) | 2337 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.5 |
|---|---|
| Top Belt Width per strand (mm) | 13 |
| Nominal Thickness (inch) | 0.31 |
| Nominal Thickness (mm) | 8 |
Design:
- Flex-Weave Cover – The Gates A90 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II A90 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II A90 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every A90 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates A-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Products
Similar Sizes:
Next Size Shorter: A89 (91 inch length)
Next Size Longer: A91 (93 inch length)
Next Size Narrower: none (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: B90 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
| Part Number | Price | Horsepower Rating (1) on a 4” Pulley | Horsepower Rating (2) on a 2.4” Pulley | Shock Load | Backside Idler | Clutching |
|---|---|---|---|---|---|---|
| Gates A90 | $16.14 | 3.92 | Not Suitable | Good | Not Ideal | Good |
| Gates 4L920 | $18.93 | 2.29 | 0.56 | Good | Good | |
| Gates 6892 | $28.20 | 2.86 | 0.69 | Excellent | Good | Good |
| Gates AX90 | $23.46 | 4.37 | 1.84 | Good | Not Ideal | Not Suitable |
| Gates AP90 | $34.11 |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications
Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)
Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)
Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)
Recommended Pulleys or Sheaves for Heavy Duty ApplicationsMulti-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
Competitive Cross-Reference:
- AC Delco A90 fan belt
- Balflex Classic A90
- Bando Power King A90
- Bestorq Wrapped A90
- Browning Super Gripbelt A90
- Carlisle Super II A90
- Continental A90 V-Belt
- ContiTech (Conti) A90
- Dayco Gold Label AP55
- Dayton A90 fan belt
- Dodge 107022 AP55
- Dunlop A90
- Fenner Classic A90
- Goodrich A90 vbelt
- Goodyear Hy-T Plus A90
- Grainger 6X631
- Hutchinson Conventional Wrapped A90
- Jason Industrial Unimatch Multi-Plus A90
- Maska Classical VBA90
- Mitsuboshi Red Label A90
- Optibelt VB A90
- Pirelli A90 veebelt
- Pix A90 vbelt
- TB Woods Conventional A90
- Thermoid Prime Mover A90
- Thermoid Select A90
