Stocking Status: Typically in Stock - Ships in 1 business day.
$7.55
- Buy 10 for $7.17 each and save 5%
- Buy 25 for $6.98 each and save 8%
- Buy 50 for $6.80 each and save 10%
Gates A33 Belt is available to buy in increments of 1
| SKU | 9002-2033 |
|---|---|
| Weight | 0.250000 |
| Length (inch) | 35 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.5 |
| Nominal Thickness (inch) | 0.31 |
Understanding the Part Number
A – The A stands for an “A” section v-belt. This is considered a “Classic” v-belt style that has a top width of ½ (0.5) inches and a thickness of 5/16 (0.312) inches.
33– 33 inches is the inside circumference of the belt. For A-section v-belts, the outside circumference is found by adding 2 inches to the inside length of the belt. So, the outside circumference of the A33 belt is 35 inches (33+2).
Specifications
Dimensions:
| Length (inch) | 35 |
|---|---|
| Length (mm) | 889 |
| Length Type | Outside Circumference |
| Top Belt Width per strand (inch) | 0.5 |
|---|---|
| Top Belt Width per strand (mm) | 13 |
| Nominal Thickness (inch) | 0.31 |
| Nominal Thickness (mm) | 8 |
Design:
- Flex-Weave Cover – The Gates A33 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II A33 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II A33 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every A33 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates A-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Products
Similar Sizes:
Next Size Shorter: A32 (34 inch length)
Next Size Longer: A34 (36 inch length)
Next Size Narrower: 6735 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: B33 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
| Part Number | Price | Horsepower Rating (1) on a 4” Pulley | Horsepower Rating (2) on a 2.4” Pulley | Shock Load | Backside Idler | Clutching |
|---|---|---|---|---|---|---|
| Gates A33 | $7.55 | 3.92 | Not Suitable | Good | Not Ideal | Good |
| Gates 4L350 | $7.55 | 2.29 | 0.56 | Good | Good | |
| Gates 6835 | $13.20 | 2.86 | 0.69 | Excellent | Good | Good |
| Gates AX33 | $9.95 | 4.37 | 1.84 | Good | Not Ideal | Not Suitable |
| Gates AP33 | $15.93 | 6.2 | Not Suitable | Excellent | Not Ideal | Good |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications
Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)
Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)
Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)
Recommended Pulleys or Sheaves for Heavy Duty ApplicationsMulti-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
Competitive Cross-Reference:
- AC Delco A33 fan belt
- Balflex Classic A33
- Bando Power King A33
- Bestorq Wrapped A33
- Browning Super Gripbelt A33
- Carlisle Super II A33
- Continental A33 V-Belt
- ContiTech (Conti) A33
- Dayco Gold Label AP55
- Dayton A33 fan belt
- Dodge 107003 AP55
- Dunlop A33
- Fenner Classic A33
- Goodrich A33 vbelt
- Goodyear Hy-T Plus A33
- Grainger 5X995
- Hutchinson Conventional Wrapped A33
- Jason Industrial Unimatch Multi-Plus A33
- Maska Classical VBA33
- Mitsuboshi Red Label A33
- Optibelt VB A33
- Pirelli A33 veebelt
- Pix A33 vbelt
- TB Woods Conventional A33
- Thermoid Prime Mover A33
- Thermoid Select A33
