Stocking Status: Special Order - Typically ships in 5-10 business days
Will drop ship from manufacturer in 1 business day with Next Day Air or 2nd Day Air Shipping Selection
Will drop ship from manufacturer in 1-2 business days if order total is over $500.00
- Buy 10 for $151.88 each and save 5%
- Buy 25 for $147.88 each and save 7%
- Buy 50 for $143.88 each and save 10%
SKU | 9003-8247 |
---|---|
Weight | 2.500000 |
Length (inch) | 248 |
Length Type | Outside Circumference |
Top Belt Width per strand (inch) | 0.66 |
Nominal Thickness (inch) | 0.41 |
– The stands for a “” section v-belt. This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.
– inches is the inside circumference of the belt. For -section v-belts, the outside circumference is found by adding inches to the inside length of the belt. So, the outside circumference of the belt is 248 inches (+).
Dimensions:
Length (inch) | 248 |
---|---|
Length (mm) | 6299 |
Length Type | Outside Circumference |
Top Belt Width per strand (inch) | 0.66 |
---|---|
Top Belt Width per strand (mm) | 17 |
Nominal Thickness (inch) | 0.41 |
Nominal Thickness (mm) | 10 |
Design:
- Flex-Weave Cover – The Gates B247PB v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II B247PB v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every B247PB belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Sizes:
Next Size Narrower: (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
Part Number | Price | Horsepower Rating (1) on a 6” Pulley | Horsepower Rating (1) on a 4” Pulley | Shock Load | Backside Idler | Clutching |
---|---|---|---|---|---|---|
Gates B247PB | $159.87 | |||||
Gates | ||||||
Gates | ||||||
Gates | ||||||
Gates |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)
Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)
Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)
Recommended Pulleys or Sheaves for Heavy Duty ApplicationsMulti-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)
- AC Delco B247PB fan belt
- Balflex Classic B247PB
- Bando Power King B247PB
- Bestorq Wrapped B247PB
- Browning Super Gripbelt B247PB
- Carlisle Super II B247PB
- Continental B247PB V-Belt
- ContiTech (Conti) B247PB
- Dayco Gold Label AP55
- Dayton B247PB fan belt
- Dodge AP55
- Dunlop B247PB
- Fenner Classic B247PB
- Goodrich B247PB vbelt
- Goodyear Hy-T Plus B247PB
- Grainger
- Hutchinson Conventional Wrapped B247PB
- Jason Industrial Unimatch Multi-Plus B247PB
- Maska Classical VBB247PB
- Mitsuboshi Red Label B247PB
- Optibelt VB B247PB
- Pirelli B247PB veebelt
- Pix B247PB vbelt
- TB Woods Conventional B247PB
- Thermoid Prime Mover B247PB
- Thermoid Select B247PB