Loading...

Stocking Status: Special Order - Typically ships in 5-10 business days

Will drop ship from manufacturer in 1 business day with Next Day Air or 2nd Day Air Shipping Selection

Will drop ship from manufacturer in 1-2 business days if order total is over $500.00

$122.23
  • Buy 10 for $116.12 each and save 5%
  • Buy 25 for $113.06 each and save 8%
  • Buy 50 for $110.01 each and save 10%
SKU 9005-2144
Weight 6.500000
Length (inch) 149
Length Type Outside Circumference
Top Belt Width per strand (inch) 1.25
Nominal Thickness (inch) 0.75
Understanding the Part Number

– The stands for a “” section v-belt. This is considered a “Classic” v-belt style that has a top width of 1 1/4 (1.25) inches and a thickness of 3/4 (0.75) inches.

– inches is the inside circumference of the belt.  For -section v-belts, the outside circumference is found by adding inches to the inside length of the belt.  So, the outside circumference of the A belt is 149 inches (+).

Specifications
Dimensions:
Length (inch) 149
Length (mm) 3785
Length Type Outside Circumference
Top Belt Width per strand (inch) 1.25
Top Belt Width per strand (mm) 32
Nominal Thickness (inch) 0.75
Nominal Thickness (mm) 19
Design:
  • Flex-Weave Cover – The Gates D144 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II D144 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II D144 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every D144 belt can be used in a matched set, regardless of batch or lot.  An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates D-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: ( inch length)

Next Size Longer: ( inch length)

 

Next Size Narrower: (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 4” Pulley Horsepower Rating (2) on a 2.4” Pulley Shock Load Backside Idler Clutching
Gates D144 $122.23
Gates
Gates
Gates
Gates
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

Competitive Cross-Reference:
  • Balflex Classic D144
  • Bando Power King D144
  • Bestorq Wrapped D144
  • Browning Super Gripbelt D144
  • Carlisle Super II D144
  • Continental D144 V-Belt
  • ContiTech (Conti) D144
  • Dayco Gold Label AP55
  • Dodge AP55
  • Dunlop D144
  • Fenner Classic D144
  • Goodrich D144 vbelt
  • Goodyear Hy-T Plus D144
  • Hutchinson Conventional Wrapped D144
  • Jason Industrial Unimatch Multi-Plus D144
  • Maska Classical VBD144
  • Mitsuboshi Red Label D144
  • Optibelt VB D144
  • Pirelli D144 veebelt
  • Pix D144 vbelt
  • TB Woods Conventional D144
  • Thermoid Prime Mover D144
  • Thermoid Select D144