Loading...

Stocking Status: Typically in Stock - Ships in 1 business day

$13.55
  • Buy 10 for $12.87 each and save 5%
  • Buy 25 for $12.53 each and save 8%
  • Buy 50 for $12.20 each and save 10%
SKU 9003-2046
Weight 0.500000
Length (inch) 49
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Nominal Thickness (inch) 0.41
Understanding the Part Number

B – The B stands for a “B” section v-belt.  This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.

46– 46 inches is the inside circumference of the belt.  For B-section v-belts, the outside circumference is found by adding 3 inches to the inside length of the belt.  So, the outside circumference of the B46 belt is 49 inches (46+3).

Specifications
Dimensions:
Length (inch) 49
Length (mm) 1245
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Top Belt Width per strand (mm) 17
Nominal Thickness (inch) 0.41
Nominal Thickness (mm) 10
Design:
  • Flex-Weave Cover – The Gates B46 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II B46 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II B46 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every B46 belt can be used in a matched set, regardless of batch or lot.  An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: B45 (48 inch length)

Next Size Longer: B47 (50 inch length)

 

Next Size Narrower: A47 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: C45 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 6” Pulley Horsepower Rating (1) on a 4” Pulley Shock Load Backside Idler Clutching
Gates B46 $13.55 8.85 Not Suitable Good Not Ideal Good
Gates 5L490 $12.72 5.21 2.3 Good Good
Gates 6949 $23.69 6.49 2.86 Excellent Good Good
Gates BX46 $17.79 10 6.04 Good Not Ideal Not Suitable
Gates BP46 $22.89 16.3 Not Suitable Excellent Not Ideal Good
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications

Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)

Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)

Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)

Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

SVS  Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)

Competitive Cross-Reference:
  • AC Delco B46 fan belt
  • Balflex Classic B46
  • Bando Power King B46
  • Bestorq Wrapped B46
  • Browning Super Gripbelt B46
  • Carlisle Super II B46
  • Continental B46 V-Belt
  • ContiTech (Conti) B46
  • Dayco Gold Label AP55
  • Dayton B46 fan belt
  • Dodge 107033 AP55
  • Dunlop B46
  • Fenner Classic B46
  • Goodrich B46 vbelt
  • Goodyear Hy-T Plus B46
  • Grainger 3X637
  • Hutchinson Conventional Wrapped B46
  • Jason Industrial Unimatch Multi-Plus B46
  • Maska Classical VBB46
  • Mitsuboshi Red Label B46
  • Optibelt VB B46
  • Pirelli B46 veebelt
  • Pix B46 vbelt
  • TB Woods Conventional B46
  • Thermoid Prime Mover B46
  • Thermoid Select B46