Stocking Status: Special Order - Typically ships in 5-10 business days
Will drop ship from manufacturer in 1 business day with Next Day Air or 2nd Day Air Shipping Selection
Will drop ship from manufacturer in 1-2 business days if order total is over $500.00
- Buy 10 for $114.03 each and save 5%
- Buy 25 for $111.03 each and save 7%
- Buy 50 for $108.03 each and save 10%
SKU | 9005-2136 |
---|---|
Weight | 6.430000 |
Length (inch) | 141 |
Length Type | Outside Circumference |
Top Belt Width per strand (inch) | 1.25 |
Nominal Thickness (inch) | 0.75 |
D – The D stands for a “D” section v-belt. This is considered a “Classic” v-belt style that has a top width of 1 1/4 (1.25) inches and a thickness of 3/4 (0.75) inches.
136– 136 inches is the inside circumference of the belt. For D-section v-belts, the outside circumference is found by adding 5 inches to the inside length of the belt. So, the outside circumference of the A136 belt is 141 inches (136+5).
Dimensions:
Length (inch) | 141 |
---|---|
Length (mm) | 3581 |
Length Type | Outside Circumference |
Top Belt Width per strand (inch) | 1.25 |
---|---|
Top Belt Width per strand (mm) | 32 |
Nominal Thickness (inch) | 0.75 |
Nominal Thickness (mm) | 19 |
Design:
- Flex-Weave Cover – The Gates D136 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
- Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
- Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Matching / Multi-Belt Drives:
Part of the V80 Matching System - Gates Hi-Power II D136 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every D136 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates D-Section Hi-Power II PowerBand belt.
Requirements Met:
RMA oil and heat resistant standards.
RMA static conductivity requirements.
Similar Sizes:
Next Size Shorter: D135 (140 inch length)
Next Size Longer: D140 (145 inch length)
Next Size Narrower: C137 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)
Next Size Wider: none (Note: Belt will sit higher in the pulley, so a longer belt might be needed)
Same Size – Different Product Line:
Part Number | Price | Horsepower Rating (1) on a 4” Pulley | Horsepower Rating (2) on a 2.4” Pulley | Shock Load | Backside Idler | Clutching |
---|---|---|---|---|---|---|
Gates D136 | $120.03 | |||||
Gates | ||||||
Gates | ||||||
Gates | ||||||
Gates |
(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley
Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)
- Balflex Classic D136
- Bando Power King D136
- Bestorq Wrapped D136
- Browning Super Gripbelt D136
- Carlisle Super II D136
- Continental D136 V-Belt
- ContiTech (Conti) D136
- Dayco Gold Label AP55
- Dodge AP55
- Dunlop D136
- Fenner Classic D136
- Goodrich D136 vbelt
- Goodyear Hy-T Plus D136
- Hutchinson Conventional Wrapped D136
- Jason Industrial Unimatch Multi-Plus D136
- Maska Classical VBD136
- Mitsuboshi Red Label D136
- Optibelt VB D136
- Pirelli D136 veebelt
- Pix D136 vbelt
- TB Woods Conventional D136
- Thermoid Prime Mover D136
- Thermoid Select D136