Loading...

Stocking Status: Typically in Stock - Ships in 1 business day

$9.83
  • Buy 10 for $9.34 each and save 5%
  • Buy 25 for $9.09 each and save 8%
  • Buy 50 for $8.85 each and save 10%
SKU 9003-2030
Weight 0.350000
Length (inch) 33
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Nominal Thickness (inch) 0.41
Understanding the Part Number

B – The B stands for a “B” section v-belt.  This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.

30– 30 inches is the inside circumference of the belt.  For B-section v-belts, the outside circumference is found by adding 3 inches to the inside length of the belt.  So, the outside circumference of the B30 belt is 33 inches (30+3).

Specifications
Dimensions:
Length (inch) 33
Length (mm) 838
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Top Belt Width per strand (mm) 17
Nominal Thickness (inch) 0.41
Nominal Thickness (mm) 10
Design:
  • Flex-Weave Cover – The Gates B30 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II B30 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II B30 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every B30 belt can be used in a matched set, regardless of batch or lot.  An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: B29 (32 inch length)

Next Size Longer: B31 (34 inch length)

 

Next Size Narrower: A31 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: none (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 6” Pulley Horsepower Rating (1) on a 4” Pulley Shock Load Backside Idler Clutching
Gates B30 $9.83 8.85 Not Suitable Good Not Ideal Good
Gates 5L330 $8.90 5.21 2.3 Good Good
Gates 6933 $16.58 6.49 2.86 Excellent Good Good
Gates BX30 $12.92 10 6.04 Good Not Ideal Not Suitable
Gates
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications

Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)

Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)

Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)

Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

SVS  Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)

Competitive Cross-Reference:
  • AC Delco B30 fan belt
  • Balflex Classic B30
  • Bando Power King B30
  • Bestorq Wrapped B30
  • Browning Super Gripbelt B30
  • Carlisle Super II B30
  • Continental B30 V-Belt
  • ContiTech (Conti) B30
  • Dayco Gold Label AP55
  • Dayton B30 fan belt
  • Dodge AP55
  • Dunlop B30
  • Fenner Classic B30
  • Goodrich B30 vbelt
  • Goodyear Hy-T Plus B30
  • Grainger 1A103
  • Hutchinson Conventional Wrapped B30
  • Jason Industrial Unimatch Multi-Plus B30
  • Maska Classical VBB30
  • Mitsuboshi Red Label B30
  • Optibelt VB B30
  • Pirelli B30 veebelt
  • Pix B30 vbelt
  • TB Woods Conventional B30
  • Thermoid Prime Mover B30
  • Thermoid Select B30