Loading...

Stocking Status: Typically in Stock - Ships in 1 business day

$7.70
  • Buy 10 for $7.32 each and save 5%
  • Buy 25 for $7.12 each and save 8%
  • Buy 50 for $6.93 each and save 10%
SKU 9002-2034
Weight 0.300000
Length (inch) 36
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.5
Nominal Thickness (inch) 0.31
Understanding the Part Number

A – The A stands for an “A” section v-belt.  This is considered a “Classic” v-belt style that has a top width of ½ (0.5) inches and a thickness of 5/16 (0.312) inches.

34– 34 inches is the inside circumference of the belt.  For A-section v-belts, the outside circumference is found by adding 2 inches to the inside length of the belt.  So, the outside circumference of the A34 belt is 36 inches (34+2).

Specifications
Dimensions:
Length (inch) 36
Length (mm) 914
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.5
Top Belt Width per strand (mm) 13
Nominal Thickness (inch) 0.31
Nominal Thickness (mm) 8
Design:
  • Flex-Weave Cover – The Gates A34 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II A34 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II A34 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every A34 belt can be used in a matched set, regardless of batch or lot.  An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates A-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: A33 (35 inch length)

Next Size Longer: A35 (37 inch length)

 

Next Size Narrower: 6736 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: B34 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 4” Pulley Horsepower Rating (2) on a 2.4” Pulley Shock Load Backside Idler Clutching
Gates A34 $7.7 3.92 Not Suitable Good Not Ideal Good
Gates 4L360 $7.23 2.29 0.56 Good Good
Gates 6836 $13.52 2.86 0.69 Excellent Good Good
Gates AX34 $10.13 4.37 1.84 Good Not Ideal Not Suitable
Gates
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications

Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)

Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)

Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)

Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

SVS  Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)

Competitive Cross-Reference:
  • AC Delco A34 fan belt
  • Balflex Classic A34
  • Bando Power King A34
  • Bestorq Wrapped A34
  • Browning Super Gripbelt A34
  • Carlisle Super II A34
  • Continental A34 V-Belt
  • ContiTech (Conti) A34
  • Dayco Gold Label AP55
  • Dayton A34 fan belt
  • Dodge 107278 AP55
  • Dunlop A34
  • Fenner Classic A34
  • Goodrich A34 vbelt
  • Goodyear Hy-T Plus A34
  • Grainger 6A143
  • Hutchinson Conventional Wrapped A34
  • Jason Industrial Unimatch Multi-Plus A34
  • Maska Classical VBA34
  • Mitsuboshi Red Label A34
  • Optibelt VB A34
  • Pirelli A34 veebelt
  • Pix A34 vbelt
  • TB Woods Conventional A34
  • Thermoid Prime Mover A34
  • Thermoid Select A34