Gates A24 Belt

SKU	9002-2024
Weight	0.150000
Length (inch)	26
Length Type	Outside Circumference
Top Belt Width per strand (inch)	0.5
Nominal Thickness (inch)	0.31

Understanding the Part Number

A – The A stands for an “A” section v-belt. This is considered a “Classic” v-belt style that has a top width of ½ (0.5) inches and a thickness of 5/16 (0.312) inches.

24– 24 inches is the inside circumference of the belt. For A-section v-belts, the outside circumference is found by adding 2 inches to the inside length of the belt. So, the outside circumference of the A24 belt is 26 inches (24+2).

Specifications

Dimensions:

Length (inch)	26
Length (mm)	660
Length Type	Outside Circumference

Top Belt Width per strand (inch)	0.5
Top Belt Width per strand (mm)	13
Nominal Thickness (inch)	0.31
Nominal Thickness (mm)	8

Design:

Flex-Weave Cover – The Gates A24 v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life. The cover protects the belt core from oil dirt and heat. The wrapped cover also makes the belt suitable for clutching applications.
Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.

Recommended Applications:

Gates Hi-Power II A24 v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.

Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II A24 v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications. All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower. In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance. Gates invested heavily to reduce manufacturing tolerances. The result was the V80 matching system that ensures that every A24 belt can be used in a matched set, regardless of batch or lot. An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates A-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Sizes:

Next Size Shorter: A23 (25 inch length)

Next Size Longer: A25 (27 inch length)

Next Size Narrower: 6726 (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: 6926 (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:

Part Number	Price	Horsepower Rating ⁽¹⁾ on a 4” Pulley	Horsepower Rating ⁽²⁾ on a 2.4” Pulley	Shock Load	Backside Idler	Clutching
Gates A24	$6.56	3.92	Not Suitable	Good	Not Ideal	Good
Gates 4L260	$6.14	2.29	0.56		Good	Good
Gates 6826	$11.49	2.86	0.69	Excellent	Good	Good
Gates AX24	$8.78	4.37	1.84	Good	Not Ideal	Not Suitable
Gates

(1) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley

(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 2.4” pulley

Compatible Pulleys / Sheaves:

Recommended Pulleys or Sheaves for Light Duty Applications

Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)

Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)

Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)

Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

SVS Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)

Competitive Cross-Reference:

AC Delco A24 fan belt
Balflex Classic A24
Bando Power King A24
Bestorq Wrapped A24
Browning Super Gripbelt A24
Carlisle Super II A24
Continental A24 V-Belt
ContiTech (Conti) A24
Dayco Gold Label AP55
Dayton A24 fan belt
Dodge 107910 AP55
Dunlop A24
Fenner Classic A24

Goodrich A24 vbelt
Goodyear Hy-T Plus A24
Grainger 3GWG7
Hutchinson Conventional Wrapped A24
Jason Industrial Unimatch Multi-Plus A24
Maska Classical VBA24
Mitsuboshi Red Label A24
Optibelt VB A24
Pirelli A24 veebelt
Pix A24 vbelt
TB Woods Conventional A24
Thermoid Prime Mover A24
Thermoid Select A24