Loading...

Stocking Status: Special Order - Typically ships in 5-10 business days

Will drop ship from manufacturer in 1 business day with Next Day Air or 2nd Day Air Shipping Selection

Will drop ship from manufacturer in 1-2 business days if order total is over $500.00

$35.91
  • Buy 10 for $34.11 each and save 5%
  • Buy 25 for $33.22 each and save 7%
  • Buy 50 for $32.32 each and save 10%
SKU 9003-7120
Weight 1.350000
Length (inch) 123
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Nominal Thickness (inch) 0.41
Understanding the Part Number

– The stands for a “” section v-belt.  This is considered a “Classic” v-belt style that has a top width of 21/32 (0.656) inches, but is commonly referred to as a 5/8 (0.625) inch belt. The thickness of the belt is 13/32 (0.406) inches.

– inches is the inside circumference of the belt.  For -section v-belts, the outside circumference is found by adding inches to the inside length of the belt.  So, the outside circumference of the belt is 123 inches (+).

Specifications
Dimensions:
Length (inch) 123
Length (mm) 3124
Length Type Outside Circumference
Top Belt Width per strand (inch) 0.66
Top Belt Width per strand (mm) 17
Nominal Thickness (inch) 0.41
Nominal Thickness (mm) 10
Design:
  • Flex-Weave Cover – The Gates B120PC v-belt is a wrapped belt that features a patented single layer fabric construction for longer cover life.  The cover protects the belt core from oil dirt and heat.  The wrapped cover also makes the belt suitable for clutching applications.
  • Flex-Bonded Cords – The Hi-Power II belt line utilizes a proprietary  core material blend that strongly bonds the polyester cords to the body of the belt, resulting in uniform load distribution and absorption of bending stress without cord deterioration.
  • Gates Curves – The belt cross-section has been optimized to provide proper cord support and full contact with the pulley to provide uniform loading, uniform wear, and increased belt life.
Recommended Applications:
Gates Hi-Power II B120PC v-belts are high quality, heavy duty belts that can be used in a variety of industrial and agricultural power transmission applications. These belts are used in HVAC applications, conveyor systems, centrifugal pumps, air compressors, crushers, and more.
Matching / Multi-Belt Drives:

Part of the V80 Matching System - Gates Hi-Power II B120PC v-belts can be used individually in a single vbelt drive or can be used in sets of 2 or more belts for higher horsepower applications.  All belts in a multiple belt drive must be within a certain length tolerance in order for the belts to work together to provide the full design horsepower.  In the past, manufacturing tolerances were wider and each belt was assigned a match number that indicated its exact length within the manufacturing tolerance.  Gates invested heavily to reduce manufacturing tolerances.  The result was the V80 matching system that ensures that every B120PC belt can be used in a matched set, regardless of batch or lot.  An alternative to using a set of individual belts is to use a joined or banded belt such as the Gates B-Section Hi-Power II PowerBand belt.

Requirements Met:

RMA oil and heat resistant standards.

RMA static conductivity requirements.

Similar Products
Similar Sizes:

Next Size Shorter: ( inch length)

Next Size Longer: ( inch length)

 

Next Size Narrower: (Note: Belt will sit lower in the pulley, so a shorter belt might be needed)

Next Size Wider: (Note: Belt will sit higher in the pulley, so a longer belt might be needed)

Same Size – Different Product Line:
Part Number Price Horsepower Rating (1) on a 6” Pulley Horsepower Rating (1) on a 4” Pulley Shock Load Backside Idler Clutching
Gates B120PC $35.91
Gates
Gates
Gates
Gates
(1)  Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 6” pulley
(2) Horsepower rating calculated using Gates Design Flex software for a single belt at 1750 rpm and a 1:1 speed ratio on a 4” pulley
Compatible Pulleys / Sheaves:
Recommended Pulleys or Sheaves for Light Duty Applications

Light Duty Sheave or Pulley – Bored to Size (Fixed diameter for single or dual belt drives)

Light Duty Sheave or Pulley – Variable Pitch – Bored to Size (Adjustable pitch diameter for single or dual belt drives)

Light Duty Sheave or Pulley – QT Bushed – (Fixed diameter for single or dual belt drives)

Recommended Pulleys or Sheaves for Heavy Duty Applications

Multi-Duty Sheave or Pulley (Fixed diameter for single or multi belt drives)

SVS  Adjustable Speed Sheave or Pulley (Adjustable pitch diameter for multi belt drives)

Competitive Cross-Reference:
  • AC Delco B120PC fan belt
  • Balflex Classic B120PC
  • Bando Power King B120PC
  • Bestorq Wrapped B120PC
  • Browning Super Gripbelt B120PC
  • Carlisle Super II B120PC
  • Continental B120PC V-Belt
  • ContiTech (Conti) B120PC
  • Dayco Gold Label AP55
  • Dayton B120PC fan belt
  • Dodge AP55
  • Dunlop B120PC
  • Fenner Classic B120PC
  • Goodrich B120PC vbelt
  • Goodyear Hy-T Plus B120PC
  • Grainger
  • Hutchinson Conventional Wrapped B120PC
  • Jason Industrial Unimatch Multi-Plus B120PC
  • Maska Classical VBB120PC
  • Mitsuboshi Red Label B120PC
  • Optibelt VB B120PC
  • Pirelli B120PC veebelt
  • Pix B120PC vbelt
  • TB Woods Conventional B120PC
  • Thermoid Prime Mover B120PC
  • Thermoid Select B120PC